DAM3128 Analog to RS485 Module Analog Acquisition Module 0-5V Voltage and Current 4-20MA Input - (Color: DAM3128W)

DAM3128 Analog To RS485 Module Analog Acquisition Module 0-5V Voltage And Current 4-20MA InputDescriptions:Function introduction:DAM-3128 is an 8-channel single-ended analog signal acquisition module, isolated RS485 communication interface, with standard MODBUS RTU protocol. It can be easily connected: configuration software such as Kingview, Force Control, Easy Control, MCGS, etc., and can also be connected to PLC, touch screen, wireless DTU module. You can also use the "serial debugging assistant" to facilitate communication and acquisition.Product Information:Communication interface: isolated RS485Baud rate: 1200~115200bpsInput channels: 8 single-ended analog inputsInput type: voltage input, current inputVoltage range: 0~5V, 1~5V, 0~2.5VCurrent range: 0~20mA, 4~20mAIsolation voltage: 2500VResolution: 12 bitsAcquisition accuracy: 1‰Sampling rate: 400HZ (total channel)/50HZ (single channel)Data communication rate: maximum 180 times/second, 22.5 times/second per channel (at 115200 BPS). Maximum 24 times/second, 3 times/second per channel (at 9600 BPS).Note: 1. Sampling rate: This parameter refers to the acquisition speed of the ADC chip.2. Data communication speed: This parameter refers to the communication speed between the MCU controller and the host computer.Input impedance: Voltage range: 10MQ Current range: 249QZero drift: ±3uV/℃Full scale factor: ±25ppm/℃Watchdog: built-in watchdog, anti-crashSupply voltage: +18v~30vdCPower protection: power reverse protectionPower consumption: rated value 0.5W@24VDCOperating temperature: conventional: -10℃~+70C/industrial grade: -40℃~+80℃Note: Conventional products can also work at 40 degrees, with an accuracy of about 1%. 40 degree accuracy of industrial grade products can be around 0.1%Item specifics:Origin: CN(Origin)Condition: NewType: Volt

• Color: DAM3128W
• Function introduction:
• DAM-3128 is an 8-channel single-ended analog signal acquisition module, isolated RS485 communication interface, with standard MODBUS RTU protocol. It can be easily connected: configuration software such as Kingview, Force Control, Easy Control, MCGS, etc., and can also be connected to PLC, touch screen, wireless DTU module. You can also use the "serial debugging assistant" to facilitate communication and acquisition.
• Product Information: