DRV-XX Digital On Delay Time Relay(DRV-02D 0-99min.)

relayGeneralDRV-XX digital timer is designed to be use wherever time dependent control is required.Usage and Working PrincipleDisplay: Displayed here while setting the time and counting down the set time. If the operating time is set in minutes, the rightmost point of the display flashes while the device is counting the time. t Knob:To set the working time value, move the knob to the desired value. When setting the time, the set time is displayed on the screen. (If the time is changed while the device is counting time, the device continues to count the new time set.)MaintenanceSwitch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemicalmight damage the device. Make sure device works after cleaningWarningsPlease use the device according to the manual.Don't use the device in wet.Include a switch and circuit breaker in the assembly.Put the switch and circuit breaker nearby the device, operator can reach easily.Mark the switch and circuit breaker as releasing connection for device.SpecificationsOperating Voltage(Un)....: 150V-260V or 110VAC; 24VDC Operating Frequency.......: 50/60 Hz.<;;6VAOperating Temperature..: -20°C.....+55°CTime(t).................................: 0.0sec, - 99hourDisplay:.................: 1x2 LED Display,2x LEDs.Connection Type..............: Terminal connectionWeight................................: Max.220gr.Contact....................:5A/250V AC (Resistive Load)Mounting.................: Assembled on the din rail<;;2000meterCable Diameter.................: 2,5mm²ConstructionWorking MechanismDimensionsConnection diagram

• relay