LED Digital Voltmeter Ammeter Split Type with CT AC100A Volt Ampere Meter AC0-500V Voltage Current Meter for Single Phase(White Cover)

AmmetersAttention:1.The meter can only be used to measure 50/60Hz sine wave circuit, it will be damaged when use to measure square wave, output of inverter and correction sine wave.2.The CT of meter is just connected to the CT socket, not need to connect to ground or device case.3.Please firstly connect the current with meter, then connect the meter with voltage testwire. After that, don'ttouch any part of the back to avoid the electric shock hazard.4.Misconnection between voltage input and current will lead damage to the meter. Please make sure the voltage and current are connected correct.5.If your device is 100Wor less than 100W, it is recommended to use 10A-current range.6.When the test voltage is less than 18V, the Voltmeteris shown as "0".7.The meter is suitable for ACSingle Phase (voltage regulator) Only.Specification:Installation:Embedded installationAccuracy:1% ± 2 digits<;0.2VAMeasurement speed:About 2 times per secondViewsize(approx):48* 24.5mmOutlinesize(approx):70*40*30mmMounting dimensions(approx):68*38mmCT wire length(approx):100mm(Except 1000A and fixed type)Color: Black cover/White cover.Features:AC Voltage and Current simultaneously by LED display.Display type:LED,red for voltage,green for current.Low power consumption.With abackcover, safeto useIncluding one independent small precise current (CT), you can lengthen the cable.Easy measurement, just connect to power and lead the wire through the current (CT).Wide measurement voltage and current range.

• Ammeters
• LED Digital Voltmeter Ammeter Split Type with CT AC100A Volt Ampere Meter AC0-500V Voltage Current Meter for Single Phase