Pipe Blockage Detector, Pipe Blockage Detector Locators Sensor Water Pipe Wall Scanner 30m Pipeline Detector, Pipe Locators

Specification:Item Type: Pipe Blockage DetectorMeasurement Range: Approx. 30m / 98.43ftTransmitter: YesReceiver: YesSensing Rang: Approx. 0 ~ 50cm / 0 ~ 19.69inTransmitter Power Supply: 1 x 3.7V 2000mAh lithium battery, shipped with built in battery. Receiver Power Supply: 1 x 3.7V 2000mAh lithium battery, shipped with built in battery. Measurement Time at Full : About 8-10 HoursHow to Use:1. Thread the line and line into the pipeline until the line cannot forward, and the position of the probe is the blocked position. 2. Turn on the power switch of the transmitter, and the green indicator light will be on. 3. Turn on the power switch of the receiver, and hold the receiver to detect along the approximate direction of the buried pipeline. If the receiver horn approaches the internal probe of the pipeline, it will emit a buzzing sound, and the maximum sound is at the blockage point. Marking it, pull out the line, and chisel open the ground to proceed with the processing. 4. After continuous use for a period of time, the green light of the product starts to flash, indicating that the remaining battery can be used for about half an hour. Please pay attention to charging in a timely manner. 5. Please hold the handle tightly, rotate the wire reel for taking up and releasing the wire.Package List:1 x Transmitter1 x Receiver1 x Charging Cable4 x Probe Accessory